 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC369LP3 / 369LP3E SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT v03.0907 Typical Applications Active Multiplier for X Band Applications: * OC-192 Clock Recovery Features Output Power: +4 dBm Sub-Harmonic Suppression: 30 dBc SSB Phase Noise: -142 dBc/Hz Single Supply: 5V@ 46 mA 16 Lead 3x3 SMT Package: 9 mm2 7 FREQUENCY MULTIPLIERS - SMT * Microwave Radio & VSAT * Military Radios, Radar & ECM * Test Instrumentation Functional Diagram General Description The HMC369LP3 & HMC369LP3E are active miniature x2 frequency multipliers utilizing InGaP GaAs HBT technology in 3x3 mm leadless QFN surface mount packages. Power output is +4 dBm typical from a single +5.0V supply and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and sub-harmonics is 30 dBc typical with respect to output signal level. The low additive SSB phase noise of -142 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC369LP3 & HMC369LP3E are ideal for use in LO multiplier chains allowing reduced parts count versus traditional approaches. The HMC369LP3 & HMC369LP3E are also useful for OC-192 clock recovery. The application of 10 GBPS data to the input generates a -7 dBm clock tone at the output with spurious signals suppressed by 25 dB. Electrical Specifi cations, TA = +25 C, Vcc= 5.0V Parameter Frequency Range, Input Frequency Range, Output Input Power Range Output Power Sub-Harmonic Suppression Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Icc) Pin= 0 dBm -5 -1 3 30 17 5.5 -142 46 61 Min. Typ. 4.95 - 5.3 9.9 - 10.6 +5 -5 0 4 30 16 6 -142 46 61 Max. Min. Typ. 5.3 - 6.35 10.6 - 12.7 +5 Max. Units GHz GHz dBm dBm dBc dB dB dBc/Hz mA 7 - 40 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC369LP3 / 369LP3E SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Output Power vs. Temperature @ 0 dBm Drive Level 8 7 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 6 5 4 3 2 1 0 -1 -2 9.5 10 10.5 11 11.5 12 12.5 13 +25 C +85 C -40 C v03.0907 Output Power vs. Drive Level 8 7 6 5 4 3 2 1 0 -1 -2 9.5 10 10.5 11 11.5 12 12.5 13 -10 dBm -5 dBm 0 dBm +5 dBm 7 FREQUENCY MULTIPLIERS - SMT 7 - 41 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ 0 dBm Drive Level 8 7 OUTPUT POWER (dBm) 6 5 4 3 2 1 0 -1 -2 9.5 Vcc=4.5V Vcc=5.0V Vcc=5.5V Input Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 +25 C +85 C -40 C 10 10.5 11 11.5 12 12.5 13 3 3.5 4 OUTPUT FREQUENCY (GHz) 4.5 5 5.5 FREQUENCY (GHz) 6 6.5 7 Output Return Loss vs. Temperature 0 -1 -2 RETURN LOSS (dB) -3 -4 -5 -6 -7 -8 -9 -10 9.5 10 10.5 11 11.5 12 12.5 13 +25 C +85 C -40 C FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC369LP3 / 369LP3E v03.0907 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT SSB Phase Noise Performance, Fout= 10.66 GHz, Input Power= 0 dBm 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 2 10 SSB PHASE NOISE (dBc/Hz) Output Spectrum 10 0 7 FREQUENCY MULTIPLIERS - SMT OUTPUT POWER (dBm) -10 -20 -30 -40 -50 -60 0 2 4 6 8 10 12 14 16 18 20 22 24 26 FREQUENCY (GHz) 10 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) 7 - 42 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC369LP3 / 369LP3E v03.0907 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Absolute Maximum Ratings RF Input (Vcc= +5V) Vcc Channel Temperature Continuous Pdiss (T=85 C) (derate 6.8 mW/C above 85 C) Thermal Resistance (Rth) (junction to ground paddle) Storage Temperature Operating Temperature +20 dBm +6.0V 150 C 440 mW Typical Supply Current vs. Vcc Vcc (V) 4.5 5.0 5.5 Icc (mA) 45 46 47 Note: Multiplier will operate over full voltage range shown above. 147.8 C/W -65 to +150 C -40 to +85 C 7 FREQUENCY MULTIPLIERS - SMT 7 - 43 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC369LP3 HMC369LP3E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] 369 XXXX 369 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC369LP3 / 369LP3E SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT v03.0907 Pin Description Pin Number 1, 2, 5-8, 1113, 15, 16 Function N/C Description No Connection. These pins may be connected to RF ground if desired. Performance will not be affected. Interface Schematic 7 FREQUENCY MULTIPLIERS - SMT 3 RFIN RF input needs to be DC blocked only if there is an external DC voltage applied to RFIN. 4, 9 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. 10 RFOUT Multiplied Output. AC coupled. No external DC blocks necessary. 14 Vcc Supply voltage 5V 0.5V. 7 - 44 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC369LP3 / 369LP3E SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT v03.0907 Evaluation PCB 7 FREQUENCY MULTIPLIERS - SMT List of Materials for Evaluation PCB 107712 [1] Item J1, J2 J3, J4 C1 U1 PCB [2] Description PCB Mount SMA Connector DC Pin 0.01 F Capacitor, 0603 Pkg. HMC369LP3 / HMC369LP3E x2 Active Multiplier 107710 Eval Board The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 45 |
Price & Availability of HMC369LP307
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |